New, an innovative liquid cleaning detergent, that automatically dissolves and neutralizes the residues of the wrapped – acid, odorless and with care for the weapon.
Who else, If not inventor of Ballistol weapon lubricant has invented an easy -to -use and effective solution for cleaning contaminated noises.
The Ballistol muffle cleansers is a solution, which automatically neutralizes the residues of the nagra. Supressors are especially difficult to clean up, If they cannot be dismantled. With Ballistol drilling cleaner, residues in the dirty noise gambler can easily dispel, rinsed and are ready for use again. The application of a cleaning detergent for
Supressors is quite simple, As it works independently and mainly takes some time to apply and dissolve the dirt.
In normal pollution 2 soak. You can then use a brush and water, To rinse the dissolved dirt.
Supressor cleaning preparation is also suitable for an ultrasonic bath.
In the case of non -removable silencers, they should be closed on one side. Ballistol cone plugs are suitable for this purpose. As the supressor is closed, Just fill up with the suppressor cleaning preparation. Here, under normal contamination, residues dissolve after about two hours. Squeeze out of the cleaner and fill the noise gulf in half with water. Close the opening and shake vigorously.
After cleaning.
With more intense contamination, the effect can be increased, If the detergent is heated to 40 ° C prior to use and exposure time increases to four or eight hours.
If the supressor was caused by extreme contamination or several hundred shots, exposure time can be increased to 24 o'clock.
The silencer purifier is without acids, odorless and gentle to the materials. Due to many different materials and surfaces, We recommend that you test any cleaning detergent for compatibility.
Color indicator for successful cleaning
Once the impurities in the silencer are released and neutralized, Supressor cleaner shows this by changing the color.
