Ultrasonic device – Dog trainer Dog Trainer for dog protection
The ultrasound device – Kuchegon Dog Trainer for dog protection is an ultrasonic electronic device, which serves to repel undesirables, aggressive dogs. The device emits ultrasound with a frequency of 25KHz, which is not heard by the people, but dogs and cats hear it perfectly. Ultrasound gives them an unpleasant sensation (not pain), causing them to leave the area around you, to run away or retreat.
Dog Trainer can also be used as a training tool for dogs. In this case, there is no need to use physical force in the upbringing of your pet, which will keep your relationship excellent. With the help of the device, you can punish your pet for disobedience, as well as to wean him from harmful habits, such as gnawing on household items or found objects and food on the street. Dog Trainer can serve to protect your pet from other dogs when walking.
Dog Trainer has four operating modes – “Sound”, "ultrasound", "Ultrasound + Flashing light" and "Light / flashing light',
A separate activation button is provided for each mode. The "Ultrasound" and "Ultrasound + Flashing light' have two selectable options: Fixed frequency 25 kHz or Variable frequency 25kHz-30kHz.
Sound mode
The device emits an audible “beep” signal for 1 second when the Sound Mode button is pressed once and a long beep when pressed for a long time.
"Ultrasound" mode
The device emits ultrasound for 1 second when pressing the "Ultrasound" Mode button once and a continuous ultrasonic signal when pressing it for a long time. Via the "Frequency" switch 1/ Frequency 2 / lock' (on the left side of the device) Fixed frequency can be selected 25 kHz or Variable Frequency 25kHz-30kHz.
"Ultrasound" mode + flashing light'
The device emits ultrasound and a flashing light when you press and hold the "Ultrasound" Mode button + Flashing Light'. Via the "Frequency" switch 1/ Frequency 2/ lock' (on the left side of the device) Fixed Frequency 25kHz or Variable Frequency 25kHz-30kHz can be selected.
Light mode / flashing light'
By pressing and holding the Light mode button / Flashing Light" for a second and a half, the device starts emitting constant light. With a single press of the button, the light becomes flashing, and another single press turns off the mode. Once activated Light Mode / Flashing Light' can be combined with any of the above modes without interrupting it. That's how Dog Trainer is 100% perfect for use at night too.
Vibration function
When activating any of the Ultrasound or Sound modes, the device emits a vibration, so long, as long as the corresponding mode button is pressed. So the user always has "confirmation"., when he activated the device.
Light indicator "Operation / Low battery'
When activating any of the Ultrasound or Sound modes, the “Operation” light indicator / Low Battery” is green for so long, as long as the corresponding mode button is pressed. When pressing and holding the Light mode button / Flashing light' for a second and a half the indicator light comes on briefly and then goes out.
When the battery is depleted to a critical level, the indicator light changes to red and starts flashing, after which the appliance switches off automatically.
Battery Charging Light
When the unit is switched on for charging, the battery charge indicator (located to the left of the charging socket) steady red light. When the battery is fully charged, the indicator light turns green.
Three powerful ultrasonic emitters and an extended range of impact
Dog Trainer is equipped with three ultrasonic/sound emitters, which increases the power and range of impact. The device is maximally efficient up to 10 meters, but dogs usually hear and respond to it at a greater distance as well.
Bright LED flashlight for constant/flashing light
The LED light source provides walking lighting or a flashing emergency light for the night. The flashing light, combined with ultrasound, enhances the effect when training or repelling dogs.
Automatic shutdown protection function
Dog Trainer automatically turns off ultrasound emission after 8 seconds as protection against misuse.
Technical characteristics
+ 4 working hours;
+ 2 type of ultrasound: 25kHz / 25kHz-30kHz;
+ Ultrasonic/Sound Emitters: 3 count;
+ Light Emitter: 1 number;
+ Maximum efficiency with ultrasound: 8-10 m;
+ Battery charger: USB-C cable;
+ Battery type: Lithium-Ion 1600 mAh;
+ Time to fully charge the battery: 2.30 h;
+ Dimensions: 125mmh55mmh42mm;
+ Weight: 130city;
+ Automatic shutdown: after 8 seconds of ultrasound radiation.
Manufacturer – K II Enterprises, USA.
Made in China.
